Products

Products > Pipe Hangers & Devices > Miscellaneous Products

Click on a figure number to see full information in PDF format.

885
Adjustable Q-Deck Insert

Function: Designed for installation in metal concrete deck forms to provide a means to support piping and equipment.

Material: Low carbon steel with electro-galvanized rod

Finish: Plain

Ordering: Specify rod size and figure number.

890
Seismic Brace

Function: Designed for bracing pipe against sway due to seismic disturbance. Often used in conjuction with Fig. 520 pipe clamp and Fig. 920 angle bracket at each end of the sway brace.

Material: Low carbon steel

Finish: Plain

Ordering: Specify figure number.

900 & 900-1
Welded Beam Attachments

Function: Designed for attaching hanger rod to the bottom flange of a beam. If installed in the inverted position, the hanger rod can be vertically adjusted, otherwise bolt and nut are required.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify rod size and figure number.

Fig. 900 With Bolt and Nut

Fig. 900-1 Without Bolt and Nut

Approvals: Complies with Federal Specification A-A-1192A (Type 22) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 22).

903
Concrete Rod Attachment Plate

Function: Designed for attaching hanger rod to a concrete ceiling.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify rod size and figure number.

904
Concrete Clevis Plate

Function: Designed for use as a structural attachment to a concrete ceiling. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify rod size and figure number.

905 & 905C
Side Beam Connectors

Function: Designed for attaching hanger rod to the side of wooden beams or walls. Normally secured in place with Fig. 48 wood drive screw.

Material: Malleable iron

Finish: Plain or copper color epoxy finish

Ordering: Specify rod size and figure number.

Fig. 905 Plain

Fig. 905C Copper Color Epoxy Finish

Approvals: Complies with Federal Specification A-A-1192A (Type 34) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 34).

906
Steel Side Beam Connector

Function: Designed for attaching hanger rod to wood structures. Secured with Fig. 45 lag screw or two Fig. 48 wood drive screws, see chart.

Material: Low carbon steel

Finish: Plain or electro-galvanized

Ordering: Specify figure number and finish.

Approvals: Underwriters’ Laboratories Listed in the U.S. (UL) and Canada (CUL), and Factory Mutual Approved. Complies with Federal Specification A-A-1192A (Type 34) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 34).

910
Reversible Angle Bracket

Function: Designed to support pipe at various distances from a wall or column.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify size number and figure number.

920
Side Beam Angle Bracket

Function: Designed for use with wood, steel or concrete beams to provide a means for supporting hanger rod. When used on steel beams Fig. 920 can be welded or bolted in place.

Material: Low carbon steel, available in stainless steel

Finish: Plain or electro-galvanized

Ordering: Specify rod size, finish and figure number.

Approvals: Complies with Federal Specification A-A-1192A (Type 34) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 34).

925
Reversible Side Beam Angle Bracket

Function: Designed for attaching hanger rod to the side of beams or walls. Fig. 925 can accommodate either 3/8 or 1/2 inch rod.

Material: Low carbon steel

Finish: Plain or electro-galvanized

Ordering: Specify finish and figure number.

Approvals: Complies with Federal Specification A-A-1192A (Type 34) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 34).

930
Square Plate Washer

Function: Designed as a heavy-duty washer to suspend hanger rods.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify rod size and figure number.

935 & 936
Welding Lugs

Function: Designed to be welded to the underside of structural members to provide a means of supporting rod attachments. Used in conjunction with Fig. 38 forged steel clevis.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify rod size and figure number.

Fig. 935 Long Welding Lug

Fig. 936 Short Welding Lug

Approvals: Complies with Federal Specification A-A-1192A (Type 57) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 57).

940, 940-1, 940-S, 941, 941-1, 941-S & 942
Ceiling Flanges

Function: Designed to provide a means for attaching hanger rod to wood beams or ceilings.

Material: Malleable iron, low carbon steel (3/8" rod size only)

Finish: Plain, electro-galvanized or copper color epoxy finish

Ordering: Specify thread size and figure number.

Fig. 940 Plain finish with bolt thread

Fig. 940-1 Plain finish with pipe thread

Fig. 940-S Steel with plain finish

Fig. 941 Electro-galvanized finish with bolt thread

Fig. 941-1 Electro-galvanized finish with pipe thread

Fig. 941-S Steel with electro-galvanized finish

Fig. 942 Copper color epoxy finish with bolt thread

Approvals: Underwriters Laboratories Listed in the U.S. (UL) and Canada (CUL) for supporting up to 2" pipe max. (3/8" rod sizes only)

950, 951, 950N & 951N
Concrete Inserts & Nuts

Function: Designed to be embedded in concrete to provide a means of suspending pipe from ceilings. The insert is held in place by nailing it to the forms, until the concrete is poured. The insert comes with a snap-out plug to keep the inner housing clean during pouring of the concrete. After the concrete has set, the plug is removed, exposing the inner housing. The rod should be tightened until it touches the top of the insert, but should not be forced further to avoid damage to the insert.

Material: Low carbon steel

Finish: Plain or electro-galvanized

Ordering: Specify figure number. If insert nut is required order separately, include the rod size and figure number.

Fig. 950 Plain

Fig. 951 Electro-galvanized

Fig. 950N Plain Insert Nut

Fig. 951N Electro-galvanized Insert Nut

Approvals: Complies with Federal Specification A-A-1192A (Type 18) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 18).

960
Turnbuckle

Function: Designed for use as a hanger rod connection on heavy loads when an adjustment of up to 6 inches is required.

Material: Forged steel

Finish: Plain or electro-galvanized

Ordering: Specify rod size, finish and figure number.

Complies with Federal Specification A-A-1192A (Type 13) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 13).

970, 970F, & 973
J-Hangers

Function: Designed for the suspension of stationary piping systems. The “T” slot in the hanger permits the side bolt to be installed after installation and setting of pipe. The side hole permits optional wall mounting. Fig. 970F has a layer of felt which helps to reduce vibration and sound.

Material: Low carbon steel

Finish: Electro-galvanized

Ordering: Specify pipe size and figure number.

Fig. 970 Electro-galvanized

Fig. 970F Electro-galvanized with felt lining

Fig. 973 Electro-galvanized with PVC coating

Approvals: Complies with Federal Specification A-A-1192A (Type 5) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 5).

980 & 982
I.P.S. Felt Isolator or
Copper Tubing Felt Isolator

Function: Designed to dampen sound vibration and prevent transmission of sound to the building structure. The felt is coated with a non-conducting binder to resist effects of moisture, abrasion and temperature and is chemically treated to repel vermin.

Material: Steel with felt lining

Finish: Plain

Ordering: Specify tube size and figure number.

Fig. 980 I.P.S.

Fig. 982 Copper