Products

Products > Pipe Hangers & Devices > Threaded Accessories

Click on a figure number to see full information in PDF format.

10
Threaded Studs

Function: Designed for use in the pipe hanger assembly.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify rod size, length (B) and figure number.
15 & 15L
Machine Thread Hanger Rod

Function: Designed for use in pipe hanger assembly.

Material: Low carbon steel, available in stainless steel

Finish: Plain

Ordering: Specify rod size, length (B) and figure number.
  • Fig. 15 Right-Hand Threads
  • Fig. 15L Right and Left-Hand Threads
    • 20 & 21
    Continuous Threaded Rod

    Function: Useful in applications where stud lengths cannot be predetermined.

    Material: Low carbon steel. Fig. 20 available in stainless steel

    Finish: Plain or electro-galvanized

    Ordering: Specify rod size, length and figure number.
  • Fig. 20 Plain
  • Fig. 21 Electro-galvanized
    • 25
    Extension Piece

    Function: Designed for attaching hanger rod to various types of attachments. Allows a 1" vertical adjustment of the rod. Frequently used in conjunction with Fig. 630 malleable iron beam clamp.

    Material: Malleable iron

    Finish: Plain

    Ordering: Specify rod size and figure number.
    30
    Eye Socket

    Function: Designed for attaching hanger rod to various types of hanger attachments.

    Material: Malleable iron

    Ordering: Specify rod size and figure number.

    Approvals: Complies with Federal Specifications A-A-1192A (Type 16) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 16).
    35 & 35L
    Weldless Eye Nuts

    Function: Designed for use in high strength and high temperature piping applications. Fig. 35L is designed to be used in conjunction with Fig. 960 forged steel turnbuckle, in applications where a vertical adjustment may be necessary.

    Material: Forged steel, available in stainless steel

    Finish: Plain

    Ordering: Specify rod size and figure number.
  • Fig. 35 Right-Hand Threads
  • Fig. 35L Left-Hand Threads

    Approvals: Complies with Federal Specifications A-A-1192A (Type 17) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 17).
    • 37
    Steel Eye Socket

    Function: Designed for attaching hanger rod to wood structures. Secured with Fig. 45 lag screw or two Fig. 48 wood drive screws, see chart.

    Material: Low carbon steel

    Finish: Electro-galvanized

    Ordering: Specify rod size and figure number.

    Approvals: Underwriters’ Laboratories Listed in the U.S. (UL) and Canada (CUL) for 3/8" and 1/2" rod sizes. Factory Mutual Approved for 3/8" only.
    38 & 38L
    Forged Steel Clevis

    Function: Designed for use as a convenient method of connecting hanger rods to pipe lugs, angles, etc. As a structural attachment it is most commonly used in conjunction with Fig. 935 welding lug.

    Material: Forged steel

    Finish: Plain

    Ordering: Specify size number, rod size, with or without pin and figure number. If other than standard combination is required, specify size number, rod size, pin size and grip. Regularly furnished with pin, unless specified otherwise.
  • Fig. 38 Right-Hand Threads
  • Fig. 38L Left-Hand Threads

    Approvals: Complies with Federal Specifications A-A-1192A (Type 14) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 14).
    • 40
    Coach Screw Rod

    Function: Designed for use as a vertical hanger attachment to wood structures.

    Material: Low carbon steel

    Finish: Plain or electro-galvanized

    Ordering: Specify rod size, length, finish and figure number.
    41
    Hex Head Bolt

    Function: Designed for use as a fastening device.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain or electro-galvanized

    Ordering: Specify diameter, length, finish and figure number. If nuts are required, refer to Fig. 110 or 110H.
    43
    Flattened End Lag Screw

    Function: Designed for attaching hangers to wood structures in light duty applications.

    Material: Low carbon steel

    Finish: Plain

    Ordering: Specify size and figure number.
    44
    Turnbuckle Adjuster

    Function: Designed to provide a vertical adjustment after pipe or tube is in place. Fig. 44 is regularly used in conjunction with Fig. 500 split ring hanger. Figure 44C is regularly used in conjunction with Fig. 502 split ring hanger.

    Material: Malleable Iron

    Ordering: Specify rod size and figure number.

    Approvals: Complies with Federal Specifications A-A-1192A (Type 15) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 15).
    45
    Lag Screw

    Function: Designed for use as a fastening device to wood structures.

    Material: Low carbon steel

    Finish: Plain

    Ordering: Specify rod size, length, and figure number.
    47D, 47S & 47W
    Concrete Anchors

    Function: 47D - Designed to function as a drill, drilling its own hole and as an anchor. The tapered chuck end of the anchor is attached to an air hammer, then after drilling is complete, the tapered end snaps off leaving the anchor flush with the wall. Useful when a large number of anchors are to be installed.

    47S - Designed to be inserted into a pre-drilled hole and set into place by means of a setting tool.

    47W - Designed to be driven into a pre-drilled hole. The expansion of the case is controlled by the tightening of the nut, this eliminates the need for an exact hole size. Useful in applications where a high resistance to vibratory loads is desired.

    Material: 47D - Case hardened steel, 47S & 47W - Low carbon steel

    Finish: Electro-galvanized

    Ordering: Specify rod size and figure number.
  • Fig. 47D Self Drilling Snap-Off Flush
  • Fig. 47S Steel Drop-In
  • Fig. 47W Wedge
    • 48
    Wood Drive Screw

    Function: Designed for use as a fastening device to wood structures.

    Material: Low carbon steel

    Finish: Plain or electro-galvanized

    Ordering: Specify size number, length and figure number.
    50-55L
    Eye Rods

    Function: Designed for use in hanger assemblies. The welded design allows the eye to develop the full strength of the rod.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify rod size, length and figure number.
  • Fig. 50 Eye Rod-Right Hand Threads
  • Fig. 50L Eye Rod-Left Hand Threads
  • Fig. 55 Welded Eye Rod-Right Hand Threads
  • Fig. 55L Welded Eye Rod-Left Hand Threads
    • 60
    J-Beam Bolt

    Function: Designed to provide a means of supporting pipe from the top flange of a beam. Useful in applications where headroom is limited.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size, length and figure number.
    70
    Anchor Bolt

    Function: Designed to be embedded in concrete to provide a means for fastening devices from concrete surfaces.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size, length and figure number.
    80
    U-Hook

    Function: Designed for the suspension of pipe below wood structures.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size, length and figure number.
    90-94
    U-Bolts

    Function: Designed for use as a support, anchor, or guide for various types of pipe. The PVC coating on Fig. 93 protects the surface of the pipe from contact with the metal surface of the U-Bolt.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain, electro-galvanized, or PVC coated

    Ordering: Specify pipe size and figure number.
  • Fig. 90 Plain
  • Fig. 91 Electro-galvanized
  • Fig. 93 PVC Coated
  • Fig. 94 Stainless Steel

    Approvals: Complies with Federal Specification A-A-1192A (Type 24) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 24).
    • Copyright © 2010 PHD Manufacturing, Inc. | Designed By Techni-Graphics Inc. | Developed By Miles Oldenburg