Products

Products > Pipe Hangers & Devices > Pipe Clamps & Riser Clamps

Click on a figure number to see full information in PDF format.

520 & 521
Standard Pipe Clamps

Function: Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod attachment.

Material: Low carbon steel, Fig. 520 available in stainless steel

Finish: Plain & electro-galvanized

Ordering: Specify pipe size and figure number.
  • Fig. 520 Plain
  • Fig. 521 Electro-galvanized

    Approvals: Complies with Federal Specification A-A-1192A (Type 4) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 4).
    • 522
    Heavy Duty Pipe Clamp

    Function: Designed to be used in the suspension of non-insulated pipe lines where heavier loads are to be suspended. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size and figure number.

    Approvals: Complies with Federal Specification A-A-1192A (Type 4) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 4).
    525
    Double Bolt Pipe Clamp

    Function: Designed for the suspension of high temperature insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment. The clamp can be used with up to 4 inches of insulation and temperatures up to 750° F.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain or electro-galvanized

    Ordering: Specify pipe size, finish and figure number.

    Approvals: Complies with Federal Specification A-A-1192A (Type 3) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 3).
    526
    Heavy Duty Double Bolt Pipe Clamp

    Function: Designed for the suspension of high temperature pipe lines. The increased material and bolt sizes allow Fig. 526 to be used in applications where heavier loads will be encountered. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment. The clamp can be used with up to 4 inches of insulation and temperatures up to 750° F.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size and figure number.

    Approvals: Complies with Federal Specification A-A-1192A (Type 3) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 3).
    535
    Offset Pipe Clamp

    Function: Designed to be used in the clamping of pipe lines at a fixed distance away from the floor or wall.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size and figure number.
    545
    Extended Pipe Clamp

    Function: Designed to be used in the suspension or support of pipe lines where exact distance between the structure and the pipe is unknown until time of installation.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size and figure number.
    550, 551 & 553
    Riser Clamps

    Function: Designed for supporting and stabilizing vertical pipe runs. The PVC coating on Fig. 553 protects the pipe from the metal surface of the clamp. This product is not intended for use with hanger rods. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping.

    Material: Low carbon steel, Fig. 550 available in stainless steel

    Finish: Plain, electro-galvanized, plain with PVC coating

    Ordering: Specify pipe size and figure number.
  • Fig. 550 Plain
  • Fig. 551 Electro-galvanized
  • Fig. 553 Plain with PVC Coating

    Approvals: Underwriters' Laboratories Listed in the U.S. (UL) and Factory Mutual Approved for sizes 3/4" to 8" only. Complies with Federal Specification A-A-1192A (Type 8) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 8).
    • 552 & 554
    Copper Tubing Riser Clamps

    Function: Designed for supporting and stabilizing vertical tubing runs. The PVC coating on Fig. 554 protects the tube from the metal surface of the clamp.

    Material: Low carbon steel, Fig. 552 available in stainless steel

    Finish: Copper color epoxy finish, copper color epoxy finish with PVC coating

    Ordering: Specify tube size and figure number.
  • Fig. 552 Copper Color Epoxy Finish
  • Fig. 554 Copper Color Epoxy Finish with PVC Coating

    Approvals: Complies with Federal Specification A-A-1192A (Type 8) and Manufacturers’ Standardization Society ANSI/SP-69 and SP-58 (Type 8).
    • 580
    Two Bolt Underground Pipe Clamp

    Function: Designed for clamping the caulked joints of underground A.W.W.A. ductile iron water pipes to prevent separation of joints.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size and figure number. Order Fig. 585 washer separately.
    585
    Washer for Fig. 580

    Function: Designed to secure tie rods when used in conjunction with Fig. 580 two bolt underground pipe clamp.

    Material: Low carbon steel. Cast iron (3/4" Tie Rod Only). Available in stainless steel except for 3/4" tie rod.

    Finish: Plain

    Ordering: Specify tie rod size and figure number.
    590
    Four Bolt Underground Pipe Clamp

    Function: Designed for clamping the caulked joints of underground A.W.W.A. ductile iron water pipe lines to prevent separation of joints.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify pipe size and figure number. Order Fig. 595 washer separately.
    595
    Washer for Fig. 590

    Function: Designed to secure tie rods when used in conjunction with Fig. 590 four bolt underground pipe clamp.

    Material: Low carbon steel, available in stainless steel

    Finish: Plain

    Ordering: Specify tie rod size and figure number.
    Copyright © 2010 PHD Manufacturing, Inc. | Designed By Techni-Graphics Inc. | Developed By Miles Oldenburg