Function

Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 1¹/₄” (31.75mm). The open U design permits rod adjustment.

Material: Malleable iron with hardened steel cup point set screw and locknut

Finish: Plain or electro-galvanized (Hot dipped galvanized with electro-galvanized hardware upon request)

Approvals: Underwriters’ Laboratories Listed in the U.S. (UL), Canada (CUL), and Factory Mutual Approved for rod sizes. Complies with Federal Specifications A-A-1192A (Type 19) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 19) which supersedes ANSI/MSS SP-69. (Approvals are only valid for beam clamps with locknut). Buy American Act compliant.

Ordering: Specify figure number, rod size, and finish.

NOTE: When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional ¹/₄  to ¹/₂ turn.

View Data Sheet