Adjustable Pipe Roller Stand With Base

Figure: 487


Designed to support pipe in applications where horizontal movement, due to expansion and contraction, will occur and vertical adjustment is required.

Material: Cast iron pipe roller with carbon steel stand, axle, and adjusting screws with locknuts. (Type 304 or 316 Stainless Steel upon request)

Finish: Plain or electro-galvanized (Hot dipped galvanized with electro-galvanized hardware upon request)

Sizing: Pipe roller size shown is for bare pipe. For proper sizing with insulation, refer to pipe roller selection guide, which is for use with pipe covering protection saddles.

Approvals: Complies with Federal SpecificationA-A-1192A (Type 46) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 46) which supersedes ANSI/MSS SP-69.

Ordering: Specify figure number, pipe roller size, material, and finish.

NOTE: Refer to Fig. 486 for measurements of roller stand.

View Data Sheet