480-480D

Adjustable Pipe Roller Support

Figure: 480 & 480D

Function

Designed to support pipe in applications where horizontal movement, due to expansion and contraction, will occur and a vertical adjustment of up to 6” (152.4) may be required. Fig. 480D is designed for supporting and guiding pipe where longitudinal movement and vertical adjustment are required.

Material: Cast iron pipe roller and sockets with carbon steel rods, axles, and hex nuts.

Finish: Plain or electro-galvanized (Hot dipped galvanized with electro-galvanized hardware upon request)

Sizing: Pipe roller size shown is for bare pipe. For proper sizing with insulation, refer to pipe roller selection guide, which is for use with pipe covering protection saddles.

Approvals: Fig. 480 only, complies with Federal Specification A-A-1192A (Type 41) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 41) which supersedes ANSI/MSS SP-69.

Ordering: Specify figure number, pipe roller size, and finish. Shipped with rods and nuts unassembled.

View Data Sheet