Function

Designed for attaching hanger rod to the bottom flange of a beam. If installed in the inverted position, the hanger rod can be vertically adjusted otherwise bolt and nut are required.

Material: Carbon steel (Type 304 or 316 Stainless Steel upon request)

Finish: Plain or electro-galvanized (Hot dipped galvanized with electro-galvanized hardware upon request)

Approvals: Complies with Federal Specification A-A-1192A (Type 22) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 22) which supersedes ANSI/MSS SP-69.

Ordering: Specify figure number, rod size, material, and finish.

NOTE: The 1″  size and larger are furnished with pin and cotter on Fig. 900.

View Data Sheet